This article Applies From:
DeMeter 2.3 |
Note: Older versions of this article exists. See 'Other Applicable Versions' to see all versions of this document.
Introduction
The following guide is designed to give instructions on how to install DeMeter devices/software as well as defining any requirements that it may need.
Contents |
DeMeter Service(s)
DeMeter is a multichannel, visual management system used to track the performance and efficiency of a manufacturing environment and present it to users using dashboards, desktop devices and mobile devices. The platform has a plug and play design. It is easy to set-up, install and configure for the everyday user.
DeMeter is suitable for the Windows platform. The DeMeter service can be installed on any Windows platform that fulfills the installation requirements listed within this document. Once DeMeter services are installed on the server, applicable clients can connect to the service(s) and their data can then be displayed on dashboard displays. Configuration of the service(s) can be modified by using secured, compatible web browsers.
Installation Requirements
The software can be installed on any machine (virtual or physical) that meets the below minimum specifications.
DeMeter Service(s) Minimum Requirements | |
Server OS Processor Memory Disk Space Physical Hardware | Windows Server 2019 8 Cores / 2GHz (64-bit) 32 GB DD3 1 TB DRIM 8 GB (615 927 9170) |
Running Requirements
When running, DeMeter Service(s) require certain ports to be open in order to operate normally. Please see below for required network ports and information about their purpose/configuration.
| Port | Type | Description | Configurable? |
| 80 | TCP |
| |
| 1664 | TCP | "DeMeter BI" Service Usage | |
| 1883 | TCP | Facilitates communication between DeMeter Service(s) and tightening products | |
| 1980 | TCP | "DeMeter FMService#" Service Usage | |
| 8666 | TCP | "DeMeter DB" Service Usage |
Before running the DeMeter platform, ensure you have installed and are planning on using a compatible browser software and version. The following browsers are supported for both the DeMeter Configurator and DeMeter dashboards.
 Chrome 45 + |  Firefox 38 + |  Edge 12 + |  Opera 30 + |  Internet Explorer Not Supported |
Software Installation
- Download the latest version of the DeMeter platform
 | To download the latest version of the software contact support. |
- Insert your DRIM (615 927 9170) into the host machine of the DeMeter platform.
- Open the installer by double-clicking on DeMeter_X.X.X.X_setup.exe. You should see something like this:
 |
|
- Start the installer by clicking on 'Install'.
- Once you have finished installing, you should see the following services running in the Services menu of Windows.
Software Registration
DeMeter licensing is managed by the usage of feature management. By inserting a DRIM (615 927 9170), the software is unlocked for usage. The value of a configuration is calculated as each setting is enable or disable and as new devices are connected to. The inserted DRIM (615 927 9170) must contain an adequate amount of UV to unlock/use this configuration in order for DeMeter to operate.
Software Configuration
To find more information about how to create configurations in DeMeter try reading our Learn the Basics section
DeMeter Collector
DeMeter Collector is a service dedicated to the direct collection of tightening result data from tightening products such as the CVIxII tooling series, CVI3 tooling series and Connect - Industrial Smart Hub.
DeMeter Collector acts as a server awaiting incoming connection from tightening controllers. Once a connection has been made and the controller connector is authorised inside of the DeMeter Configurator then tightening results are transferred to the NOSQL database used by DeMeter to store data..
Installation Requirements
The software can be installed on any machine (virtual or physical) that meets the below minimum specifications.
DeMeter Service(s) Minimum Requirements | |
Server OS Processor Memory Disk Space | Windows Server 2019 8 Cores / 2GHz (64-bit) 32 GB DD3 1 TB |
Running Requirements
When running, DeMeter Collector requires certain ports to be open in order to operate normally. Please see below for required network port(s) and information about their purpose/configuration.
| Port | Type | Description | Configurable? |
| 1883 | TCP | Facilitates communication between DeMeter Collector and DeMeter | |
| 10002 | TCP | Listening Port for incoming tightening controller connections | |
| 10020 | TCP | Facilitates usage of the DeMeter Collector (HMI) Monitor |
Software Installation
- Download the latest version of the DeMeter platform
| To download the latest version of the software contact support. |
- Open the installer by double-clicking on DeMeterCollector_X.X.X.X_setup.exe. You should see something like this:
- Start the installer by clicking on 'Install'.
- Once you have finished installing, you should see the following services running in the Services menu of Windows.
Software Registration
DeMeter licensing is managed by the usage of feature management. By inserting a DRIM (615 927 9170), the software is unlocked for usage. The value of a configuration is calculated as each setting is enable or disable and as new devices are connected to. The inserted DRIM (615 927 9170) must contain an adequate amount of UV to unlock/use this configuration in order for DeMeter to operate.
Whilst the DeMeter Collector does not require the DRIM to run and receive connections. It will not store any traceability until devices are authorised with the DeMeter configurator where UV are calculated. Furthermore, the DeMeter configurator, database and other functionality will not run whilst a DRIM is not connect
Software Configuration
To find more information about how to create configurations in DeMeter try reading our Learn the Basics section
DeMeter Assistant
DeMeter Assistant is a mobile application that allows users to send and receive status information about production monitored by the DeMeter service. Users are notified of any issues reported by the DeMeter Service(s), these users can also assign themselves to the issues to ensure they are resolved by the persons with correct competences.
Supported Mobile Operating Systems
Before beginning to install the DeMeter Assistant mobile application, ensure you have a mobile device with a compatible mobile operating system and version. See below:
 Android 6 + |  iOS Not Supported |
Application Installation
- Download the DeMeter Assistant application from the Android Play Store:
https://play.google.com/store/apps/details?id=com.desoutter.demeter.assistant&hl=fr - Use the QR Code here to open the Play Store on your mobile device:
