This Article Applies From:
CVI Fusion --
Infinity Client --
Infinity Module --
Core Services --
DeMeter 2.1.5
CVI Net Web --


Introduction

The following article explains how to upgrade the firmware of the CONNECT housing the DeMeter service.


Contents

1  DeMeter Service

1.1  Upgrade Procedure


DeMeter Service 


The DeMeter Service is housed inside of a CONNECT device. As a result, in order to upgrade the DeMeter service you must upgrade the firmware version of the connect. This is done by using a USB stick.


Upgrade Procedure  

To get a download link for the latest firmware version, contact support


  • Place the firmware files on the root directory of a USB memory stick
  • Plug this USB memory stick into the front USB port of the CONNECT housing the DeMeter service
  • With the main screen shown like below, click the up arrow to show the menu.
  • Click on Maintenance
  • Click on System

  • Click on USB Key
  • Click on Upgrade SW
  • Confirm the upgrade by clicking on 'Yes'


If CONNECT firmware is not found on the inserted USB device the message here will be show to the user.




Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.