This Article Applies From:
CVI Fusion --
Infinity Client --
Infinity Module --
Core Services --
DeMeter 2.1.5
CVI Net Web --


Introduction

The following article explains how to save the configuration and logs of the DeMeter service.


Contents

1  DeMeter Service

1.1  Procedure


DeMeter Service 


The DeMeter Service is housed inside of a CONNECT device. As a result, in order to save the logs and configuration service you should use a USB stick.


 Procedure  

  • Place the firmware files on the root directory of a USB memory stick
  • Plug this USB memory stick into the front USB port of the CONNECT housing the DeMeter service
  • With the main screen shown like below, click the up arrow to show the menu.
  • Click on Maintenance
  • Click on System

  • Click on USB Key
  • Click on Save
  • Select 'Save logs' and 'Save configuration' before clicking the tick icon in the bottom right corner.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.