This Article Applies From:
CVI Fusion --
Infinity Client --
Infinity Module --
Core Services --
DeMeter 2.1.5
CVI Net Web --


Introduction

The following article explains how to upgrade the firmware of the CONNECT housing the DeMeter service.


Contents

1  DeMeter Service

1.1  Upgrade Procedure


DeMeter Service 

The DeMeter Service is housed inside of a CONNECT device. As a result, in order to upgrade the DeMeter service you must upgrade the firmware version of the connect. This is done by using a USB stick.


Upgrade Procedure  

To get a download link for the latest firmware version, contact support


  • Place the firmware files on the root directory of a USB memory stick
  • Plug this USB memory stick into the front USB port of the CONNECT housing the DeMeter service
  • With the main screen shown like below, click the up arrow to show the menu.
  • Click on Maintenance
  • Click on System

  • Click on USB Key
  • Click on Upgrade SW
  • Confirm the upgrade by clicking on 'Yes'


If CONNECT firmware is not found on the inserted USB device the message here will be show to the user.