This Article Applies From:
CVI Fusion --
Infinity Client --
Infinity Module --
Core Services --
DeMeter 2.1.5
CVI Net Web --


Introduction

The following article explains how to save the configuration and logs of the DeMeter service.


Contents

1  DeMeter Service

1.1  Procedure


DeMeter Service 

The DeMeter Service is housed inside of a CONNECT device. As a result, in order to save the logs and configuration service you should use a USB stick.


 Procedure  

  • Place the firmware files on the root directory of a USB memory stick
  • Plug this USB memory stick into the front USB port of the CONNECT housing the DeMeter service
  • With the main screen shown like below, click the up arrow to show the menu.
  • Click on Maintenance
  • Click on System

  • Click on USB Key
  • Click on Save
  • Select 'Save logs' and 'Save configuration' before clicking the tick icon in the bottom right corner.