Introduction

The article serves to gives in-depth product information about the Connect - Industrial Smart Hub (also known as Connect-W, Connect-X or simply CONNECT).


Contents

1  Hardware Information

1.1  Available Models

1.2  Dimensions

1.3  Weight

1.4  Power Information

1.4.1  Power Supply

1.4.2  Max Current Draw

1.4.3  Power Consumption

1.5  Front Panel

1.6  Rear I/O

1.7  Environment

1.8  Network


Hardware Information  


Available Models  


CONNECT-X
615 932 7220
CONNECT-W
615 932 7230
Weight
2.1 kg / 4.63 lb
Volume4.2 L
DisplayCapacitive colour touch screen (4.3’’)
Access Point  
Removable Integrated Memory 
Power Supply110-220V AC or 24V DC
Connectivity4 x Ethernet
4 x USB
1 x RS-232
1 x eBUS
1 x Fieldbus Card Slot
IP Protection(s)IP 40
IP 54 (with an additional accessory)
Available AccessoriesWall mounting
Stack light
Socket/Bit tray
Operator panel
Fieldbus
I/O expander
Desoutter Sight


Dimensions  


mmin.
A2278.94
B903.54
C2228.74
D2108.28
E2158.46
F (only applicable to CONNECT-W)39015.35


Weight  

ModelDesoutter Part Numberkg
lb
CONNECT-X61593272202.14.63
CONNECT-W61593272302.14.63


Power Information  

Power Supply  


CONNECT-X
615 932 7220
CONNECT-W
615 932 7230
AC Voltage Supply100-120V or 200-240V
DC Voltage Supply24V


Max Current Draw  

Available Power Supply RangesMaximum Current Draw
110-120V AC
2.5A
200-240V AC1.25A
24V DC4A

*Applicable to all models of CONNECT.


Power Consumption  


Wattage
Power Consumption (Device on Standby)15W


Front Panel  



Description
1Home Button
2LEDs (Red, Blue, Green)
3Power Button
4Touchscreen Display
5RFID Antenna


Rear I/O  

Location: Bottom of Front Panel


Description
1USB Port
2RIM Slot
3USB Mini Port


Location: Inside Access Panel


Description
1ON/OFF Switch
2AC Power Cable Port (IEC 60320 C5)
324V DC Power Connector Port
4RS-232 Port
5eBUS Port
6Ethernet Ports 1 & 2
7Ethernet Ports 3 & 4*
8USB Ports 1 & 2
9Fieldbus Module Slot

*Ethernet Port 4 has Power over Ethernet (PoE) capability


Environment  


Description
Storage Temperature
-20 to +70°C (-4 to +113°F)
Operating Temperature0 to +45°C (+32 to +113°F)
Storage Humidity0-95% RH (non-condensing)
Operating Humidity0-90% RH (non-condensing)
Max Altitude
2000m (6562 feet)
Pollution DegreePollution Degree 2
Indoor Use Only 


Network  


Description
Radio Configuration3x3 MIMO, Dual Band
Available Center Frequency Ranges
  • 5.180 GHz ~ 5.825 GHz
  • 2.412 GHz ~ 2.484 GHz
Available Channel Bandwidth(s)
  • 20 MHz
  • 40 MHz
  • 80 MHz
Radio Modulation/Data Rates (Dynamic Link Adaptation)
  • 802.11ac: MCS0-9 (5.x GHz)
  • 802.11a: 6, 9, 12, 18, 24, 36, 48 and 54 Mbps (5.x GHz)
  • 802.11n: MCS0-23 (5.x and 2.4 GHz)
  • 802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54 Mbps (2.4 GHz)
802.11ac Wave 1 Capabilities
  • 802.11 dynamic frequency selection (DFS) as an AP and Client
  • Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx), Maximal ratio combining (MRC), Cyclic shift diversity (CSD), Frame aggregation, block ACK, 802.11e compatible bursting, Spatial multiplexing, cyclic-delay diversity (CDD), low-density parity check (LDPC), Space Time Block Code (STBC)
  • Phy data rates up to 1.3 Gbps (80 MHz channel)
802.11n version 2.0 Capabilities
  • 802.11 dynamic frequency selection (DFS) as an AP and Client
  • Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx), Maximal ratio combining (MRC), Cyclic shift diversity (CSD), Frame aggregation, block ACK, 802.11e compatible bursting, Spatial multiplexing, cyclic-delay diversity (CDD), low-density parity check (LDPC), Space Time Block Code (STBC)
  • Phy data rates up to 450 Mbps (40 MHz channel)