This Article Applies From:
CVI3 1.5.2.X


Introduction

This article serves to give information about localisation of the CVI3 Vision and TWINCVI3 tool controllers including changing of user interface details, language and date-time information.


Contents

1  Display

1.1  Device Name

1.2  Torque Unit

1.3  Speed Unit

1.4  Device Sound

1.5  Backlight

2  Language

3  Date & Time

3.1  Set Date & Time

3.2  Date-Time Format

3.3  Sync Source


Display  


Click the Main Menu icon

Navigate to "Configuration > Controller > User Interface > Display"


Device Name  

  • Customise the name of the of the CVI3 device using the "Description" parameter.
  • Save any changes made by tapping the save button  in the bottom right-hand corner


Torque Unit  

  • Customise the torque unit to be displayed on-screen by using the "Torque Unit" parameter.
  • Save any changes made by tapping the save button  in the bottom right-hand corner


Speed Unit  

  • Customise the speed unit to be displayed on-screen by using the "Speed Unit" parameter.
  • Save any changes made by tapping the save button  in the bottom right-hand corner


Device Sound  

  • Define whether the CVI3 controller should emit a beeping sound during screen usage by using the "Keypad beep enabled" checkbox.
  • Save any changes made by tapping the save button  in the bottom right-hand corner


Backlight  

  • Define whether the backlight for the CVI3 screen should automatically turn off after a set period of time by using the "Back light auto off" checkbox and defining a value in the "Back light time out" parameter. The default value for a CVI3 is to power off the screen after 2 minutes of inactivity.
  • Save any changes made by tapping the save button  in the bottom right-hand corner


Language  


Click the Main Menu icon

Navigate to "Configuration > Controller > User Interface > Language"

p>

Select your desired on-screen language

Save your selection by tapping the save button  in the bottom right-hand corner


The following languages are available as of CVI3 firmware version 2.1.4.2 :

EnglishRussian
FrenchPortuguese
SpanishDutch
GermanPortuguese (Brazil)
SwedishKorean
ItalianFarsi
JapaneseCzech
ChineseTurkish
Polish



Date & Time  


Click the Main Menu icon

Navigate to "Configuration > Controller > User Interface > Date & Time"


Set Date & Time  

  • Update the date and time of the CVI3 by clicking on the date-time property directly. Use the menu that appears to define the date and time required.
  • Save any changes made by tapping the save button  in the bottom right-hand corner


Date-Time Format  

  • Define the date-time format used in your country or region by using the "Date Format" parameter.
  • Save any changes made by tapping the save button  in the bottom right-hand corner


Sync Source  

  • Define whether the date and time should be updated by a server/service connection instead of using the time manually set on the CVI3 by using the "Sync Source" parameter. 
  • Save any changes made by tapping the save button  in the bottom right-hand corner